Filters
Question type
Study Flashcards

ASRS stands for


A) automated storage and retrieval system.
B) automated storage and recovery system.
C) automated scan and recognize system.
D) automated scan and retail system.
E) automated stocking and removal system.

Correct Answer

verifed

verified

A(n)________ addresses flow,allocates space,and responds to customer behavior.

Correct Answer

verifed

verified

Process-oriented layouts typically have low levels of work-in-process inventory.

Correct Answer

verifed

verified

An assembly line with 11 tasks is to be balanced.The longest task is 2.4 minutes,the shortest task is 0.4 minutes,and the sum of the task times is 18 minutes.The line will operate for 600 minutes per day. a.Determine the minimum and maximum cycle times. b.What range of output is theoretically possible for the line? c.What is the minimum number of stations needed if the maximum output rate is to be sought? d.What cycle time will provide an output rate of 200 units per day?

Correct Answer

verifed

verified

Minimum cycle time is 2.4 minutes.Maximu...

View Answer

Which of the following is not one of McDonald's "seven major innovations"?


A) the Happy Meal
B) drive-through windows
C) breakfast menus
D) play areas
E) "Made by You" kitchen system

Correct Answer

verifed

verified

One of the major advantages of process-oriented layouts is


A) high equipment utilization.
B) large work-in-process inventories.
C) flexibility in equipment and labour assignment.
D) smooth and continuous flow of work.
E) its ability to handle high volume,low variety.

Correct Answer

verifed

verified

Which of the following is not an information requirement for solving a load-distance problem?


A) a list of departments or work centers
B) a projection of work flows between the work centers
C) the distance between locations
D) a list of product cycle times
E) the cost per unit of distance to move loads

Correct Answer

verifed

verified

Which layout type assumes an adequate volume for high equipment utilization?


A) product-oriented layout
B) process-oriented layout
C) fixed-position layout
D) retail layout
E) warehouse layout

Correct Answer

verifed

verified

________ avoids placing materials or supplies in storage by processing them as they are received for shipment.

Correct Answer

verifed

verified

A process-oriented layout is the traditional way to support a product differentiation strategy.

Correct Answer

verifed

verified

If a layout problem is solved by use of "heuristics," this means that


A) there was no other way to solve the problem.
B) no computer software was available.
C) the problem has only a few alternatives to evaluate.
D) no optimum solution exists.
E) a "satisfactory" solution is acceptable.

Correct Answer

verifed

verified

Identify the seven fundamental layout strategies.Describe the use of each one very briefly.

Correct Answer

verifed

verified

1.Office layout: Positions workers,their...

View Answer

What are the advantages of focused factories?

Correct Answer

verifed

verified

Focused factories are better a...

View Answer

Briefly explain what "slotting" is.Why is slotting considered a "controversial" practice? What ethical issues might arise with regard to slotting?

Correct Answer

verifed

verified

Slotting is the practice of manufacturer...

View Answer

Departments A,B,C,and D need to be assigned to four rooms 1,2,3,and 4.These rooms are arranged in a row,in that order,with 20 meters between each.The departmental work flows are contained in the table below. a.What is the material handling total of assigning A-1,B-2,C-3,D-4? b.What is the material handling total of assigning A-1,B-3,C-4,D-2? Departments A,B,C,and D need to be assigned to four rooms 1,2,3,and 4.These rooms are arranged in a row,in that order,with 20 meters between each.The departmental work flows are contained in the table below. a.What is the material handling total of assigning A-1,B-2,C-3,D-4? b.What is the material handling total of assigning A-1,B-3,C-4,D-2?

Correct Answer

verifed

verified

(a)The material handling total of A-1,B-...

View Answer

A firm is planning to set up an assembly line to assemble 40 units per hour,and 57 minutes per hour are productive.The time to perform each task and the tasks which precede each task are: A firm is planning to set up an assembly line to assemble 40 units per hour,and 57 minutes per hour are productive.The time to perform each task and the tasks which precede each task are: a.Draw a network diagram of precedence relationships. b.Compute the required cycle time per unit in minutes. c.Compute the theoretical minimum number of workstations required to produce 40 units per hour. d.Balance this line using longest processing time. e.What is the efficiency of the line obtained in part d? a.Draw a network diagram of precedence relationships. b.Compute the required cycle time per unit in minutes. c.Compute the theoretical minimum number of workstations required to produce 40 units per hour. d.Balance this line using longest processing time. e.What is the efficiency of the line obtained in part d?

Correct Answer

verifed

verified

(a)The appropriate diagram appears below...

View Answer

The assumptions necessary for a successful product layout include all of the following except


A) adequate volume for high equipment utilization.
B) standardized product.
C) volatile product demand.
D) All of the above are appropriate assumptions.
E) None of the above are an appropriate assumption.

Correct Answer

verifed

verified

A hospital's layout most closely resembles which of the following?


A) product oriented
B) work cell
C) job shop
D) project
E) none of the above

Correct Answer

verifed

verified

The major problem addressed by the warehouse layout strategy is


A) minimizing difficulties caused by material flow varying with each product.
B) requiring frequent contact close to one another.
C) addressing trade-offs between space and material handling.
D) balancing product flow from one work station to the next.
E) reducing the dependence on ASRS.

Correct Answer

verifed

verified

Cross-docking is


A) seldom placing an item in storage,it is sent straight from incoming to outbound.
B) using docks for either incoming or outbound shipments.
C) using a single dock to unload and then load the same truck.
D) not applicable for a low-cost strategy.
E) not useful in reducing product handling costs.

Correct Answer

verifed

verified

Showing 21 - 40 of 161

Related Exams

Exam 1

Operations and Productivity

126 Questions

Exam 2

Operations Strategy in a Global Environment

135 Questions

Exam 3

Project Management

122 Questions

Exam 4

Forecasting

144 Questions

Exam 5

Design of Goods and Services

137 Questions

Exam 6

Managing Quality

130 Questions

Exam 18

Statistical Process Control

156 Questions

Exam 7

Process Strategy and Sustainability

131 Questions

Exam 19

Capacity and Constraint Management

107 Questions

Exam 8

Location Strategies

140 Questions

Exam 10

Human Resources,job Design,and Work Measurement

192 Questions

Exam 11

Supply-Chain Management

145 Questions

Exam 20

Outsourcing As a Supply-Chain Strategy

73 Questions

Exam 12

Inventory Management

171 Questions

Exam 13

Aggregate Planning

134 Questions

Exam 14

Material Requirements Planning Mrpand Erp

169 Questions

Exam 15

Short-Term Scheduling

139 Questions

Exam 16

Jit and Lean Operations

138 Questions

Exam 17

Maintenance and Reliability

130 Questions

Exam 21

Decision-Making Tools

97 Questions

Exam 22

Linear Programming

100 Questions

Exam 23

Transportation Models

94 Questions

Exam 24

Waiting-Line Models

135 Questions

Exam 25

Learning Curves

111 Questions

Exam 26

Simulation

92 Questions

Show Answer